-
Black
Good, hefty radiators
-
Black
Excellent radiators. Everything is well thought out, assembly is very easy, hardware included with spares! I recommend 101%!
-
Black
The radiators arrived, they look decent, but one had a bent cover — I straightened it out by hand. The RAM temperature dropped by half (DDR5 Patriot).
-
White
Good radiators, plenty of thermal pads included
-
Black
Pros:
I liked everything, the kit is great, the only thing is it would be nice to also include a soft pad besides the thermal pads, for those who have memory chips on only one side, so you don't have to stick on a thick thermal pad.
-
Black
Cons:
I couldn't get it to stay on the memory, it keeps popping off. I used all the silicone pads, didn't help. No idea what kind of memory this is for, but it's gotta be pretty thick.
-
Black
It does the job
-
Radiators work fine. Quality and finish are good.
-
Already tested the temperatures — -7 and -9 degrees under about 80% load, so yeah, it works fine
-
Pros:
Good radiators
Cons:
Very long delivery
Comment:
Radiators do their job. They look good, are heavy, and cost less than the memory itself😀
-
Pros:
Everything is stylish and cool, they handle their functions well 👍
-
Pros:
Very high-quality build, each radiator comes with a screwdriver — huge respect for that. I recommend the seller. Arrived on time.
-
Pros:
The radiators are good, they do their job, they were easy to install on the RAM, thanks
-
Pros:
Bomb-ass radiators for any type of memory.
-
Pros:
Heavy, solid build and well-equipped
Cons:
One of the slats is a slightly different shade (visible in the photo)
Comment:
Bought it for the looks, turned out great!
-
Pros:
Everything's good, everything as stated. Arrived two weeks early.
-
Pros:
A complete set of gaskets for many situations
Cons:
No instructions or recommendations, even though the developer seems to have thought of everything
Comment:
For those who don't know about ECC or other tightly-packed RAM (dual-sided and dual-rank), there are 2 medium and 2 thin thermal pads. Both medium ones go on the substrate, both thin ones on the heatsink, and nothing will be crooked or bulging. I've installed this on several 64GB ECC sticks, everything screwed down perfectly, as if someone actually put thought and effort into the design. No cutting or trimming required anywhere. In my case, the thickest pads were left unused, I'll use them in other devices. I tried different ways of placing the pads and arrived at the method I described here — it's the most sensible one. Give it a try.
-
Pros:
Looks fire, way better looking than the bare stock memory stick.
Cons:
No downsides.
Comment:
It's not like the RAM is overheating, but if the temperature drops a couple of degrees, that would be nice too) thanks to the seller!
-
I installed it on DDR5 Kingston with Hynix chips. The graph shows the difference between a stick with a heatsink and one without. About 10 degrees.
-
Pros:
Good set of accessories
Cons:
Thermal pads
Comment:
Arrived earlier than expected. The downside is the thermal pads that barely stick to the memory.
-
Pros:
Decent heatsinks. They fit fine on dual-rank ECC memory, but they sit a bit loose. The thermal pads need to be slightly thicker.
-
Pros:
Good set of accessories
Cons:
Delayed
-
Cons:
Expensive
-
Pros:
Temperature without radiator 50 (that's also normal) now 32, works as it should. Comes with everything you need for installation (screws, gaskets) easy to assemble
Cons:
No assembly instructions, but it's easy to figure out
Comment:
I installed it on DDR4 chips on one side; where there are no chips, I used the thickest pad, and on the chips—in my case—the thinnest one. That way the board sits centered.
-
Bought them mostly for aesthetics, so the bare sticks wouldn't be sticking out, but they seem to handle their actual cooling job just fine too. If the case fans are off, they heat up about the same as the sticks did without heatsinks, but the moment you get even the slightest airflow over them, they turn ice-cold. I take it the memory itself is getting cooled along with them.
-
Pros:
Excellent radiators. "Heavy-duty". Temps dropped by 20 degrees (was around 60, now it doesn't go above 40-42)
Cons:
Thermal conductivity of the stock pads is "meh" — swapped them for Fehonda 21W. No clear instructions either in the box or on the website.
Comment:
Good radiators. The main thing is to go to the website and look at their "pretty pictures", from which it becomes clear that the "green thing" is not a thermal pad, but a "spacer" for single-sided modules (placed behind the stick, on the side without memory chips), or for low-profile ones (placed on top of the stick in the gap of the radiator)!
-
Pros:
They do their job.
Cons:
delivery was a bit delayed
-
Pros:
Excellent cooling
-
Pros:
Quality
Cons:
Not very good thermal pads.
Comment:
Radiators are awesome. Dropped DDR4 temps by 21 degrees with good thermal pads installed. Very hefty. Not your standard foil!
-
Excellent radiator, does its job well. Comes with a lot of thermal pads of different thicknesses — the thickest one fit my memory. Also includes a screwdriver, but mine arrived with corrosion. The radiators themselves look nice, minimalist, without any flashy crap or badges. 10/10
