-
Temperatures under load dropped by 5°C. I cut it because one SSD is small. Under the adhesive base there's a black layer (possibly graphene). When sticking it on, I noticed the capacitors are taller than the memory chips and the controller, so the copper edge ended up resting right on them. I decided to check for continuity, there was a short circuit, so I re-applied it and bent the edges slightly upward. BE CAREFUL AND CAUTIOUS WHEN APPLYING
-
Pros:
Good quality👍well packaged.
Comment:
Installed an SSD on one side, removed the sticker from the SSD. Temperature dropped from 55 to 47. It does its job of dissipating heat.
-
Pros:
Out of several orders, almost everything arrived intact — only one plate had a 1 cm fold from packaging that left a crease, but after flattening it's almost invisible. The coating is well applied, they do their job. I used them on the underside of a double-sided M.2 drive, and the controller temperatures on the top side dropped by 1–3 degrees at idle (depending on fan speed). Happy with the result, happy with the order overall, thank you
-
No problems.
-
If you've got nothing, zero space, nowhere to go, then this is your option. If you have room for a normal radiator (at least 10 mm), then this is not your option. But as it is, it does its job, so let it be.
-
Pros:
I already had this radiator, everything works great, ordered another one.
Cons:
Delivery was delayed. The seller took a long time to ship.
-
Radiator is excellent. Worth buying.
-
Pros:
Installed this heatsink on an M2 SSD
Comment:
Quality is decent
-
Pros:
works
-
Pros:
All good. Decent quality. Didn't check the thickness. Worth the money. Recommend.
-
Pros:
Arrived on time. We'll see how they perform in action.
-
Pros:
Arrived on time, let's see how they work.
-
Pros:
One of the best radiators.
-
Pros:
Full set, good quality
-
Cool little thing, I stuck it on and the northbridge temp dropped by 10 degrees, then it started creeping back up slowly, now it's 68, was 72, I think not bad
-
Pros:
Excellent radiator
-
Pros:
PS5 slim fit perfectly, the lid closed, and the spacer is in place too.
-
Pros:
It fit the Adata Legend 960
Comment:
Fit the Adata Legend 960, only added 0.5mm thermal pads to give it more clearance from the video card
-
Pros:
Good, but I got a different one.
-
Good radiator, but it cools more effectively if you sand the base with sandpaper.
-
Pros:
It seems to cool
Cons:
Not detected
-
Pros:
Excellent radiator. Low profile, fits under the GPU radiator. Drops NVMe SSD temps by about 15 degrees.
