Name: M.2 2280 mis radiatoru üçün uyğundur, qalınlığı 0,8/1 mm, JEYI
Brand: JEYI
SKU: 231667046
Price: 9.81 AZN
Availability: InStock
Rating: 4.7 (23 reviews)

Oxşarlar

9,81 ₼ ~~14,94 ₼~~

Rəng: mis

Məhsul kodu	231667046
Rəng	mis
Korpusun materialı	mis
Soyutma sisteminin təyinatı	ssd
Məhsulun qablaşdırmasız çəkisi (q)	45 q
Qablaşdırmanın uzunluğu	10 sm
Qablaşdırmanın hündürlüyü	1 sm

Bütün xüsusiyyətlər

Rəng	mis

Korpusun materialı	mis

Soyutma sisteminin təyinatı	ssd

Məhsulun qablaşdırmasız çəkisi (q)	45 q

Qablaşdırmanın uzunluğu	10 sm
Qablaşdırmanın hündürlüyü	1 sm
Qablaşdırmanın eni	10 sm
Qablaşdırma ilə çəki (kq)	0.051 kq

maye soyutma sistemləri və komponentlər JEYI maye soyutma sistemləri və komponentlər

9,81 ₼ ~~14,94 ₼~~

26 noyabr, satıcının anbarı
N11.az

Rəylər, suallar və məqalələr

Qiymətləndirmələr 23

04 iyul

brown

I slapped this "heatsink" onto an SSD, peeled off the original sticker, stuck the Honeywell onto the controller, and put the original thermal interface onto the memory chips. Temps dropped by 5°C to 15°C and don't jump around as much under load — it heats up more slowly now. Overall, I'm happy. Had to use this kind of "heatsink" because of limited space (the M.2 slot is on the back of the motherboard).
09 mart

Packaging is superb. The plates are copper. I installed them on thermal paste, pressed them down, and soldered the sides with solder. Under load, the temperature dropped by 26 degrees!!!! I didn't expect that.
21 dekabr 2025

Üstünlükləri: Crooked radiator. Don't buy this piece of junk!
18 dekabr 2025

Üstünlükləri: Works. Çatışmazlıqlar: Write the thickness of the thermal pads, sitting there with a magnifying glass trying to figure out which one goes where — took way too long. Şərh: Temperature under load dropped by 10 degrees, plus it cools down faster after peak loads. Happy with it.
11 dekabr 2025

Overall, if you don't have room for a normal heatsink, this thing works, but there are a lot of caveats. 1. If there's not much space below the SSD, it won't fit. 2. It's not suitable for installing the SSD underneath (and yeah, this might just be my problem, but it's still useful to know). When I installed the heatsink on the bottom, I realized there was no room left and it was longer than the mounting space (the front hits the contacts, the back hits the bracket). 3. The heatsinks have a slight curve, I had to straighten them out. 4. The thermal pads are absolutely useless. You can see in the photo that they have a mesh backing, so there's no way you're getting any decent thermal conductivity. 5. The mounting uses rubber bands, and yeah, I didn't even consider that option because it's easier to just apply liquid thermal pad than mess around with them.
28 noyabr 2025

Üstünlükləri: Simplicity of application and price
20 noyabr 2025

Üstünlükləri: good that the plates are copper with aluminum the temperature was 47 and with copper 37 in my opinion a big difference grateful.
06 oktyabr 2025

Üstünlükləri: Great kit: real copper, thermal pads, rubber bands. Everything you need to quickly whip up a solid thermal interface. Works well, temps don't jump around like before. The drives actually run cooler now, a few degrees down. Excellent kit, would recommend, works effectively.
06 oktyabr 2025

Üstünlükləri: Great kit: real copper, thermal pads, rubber bands. Everything you need to quickly whip up a solid thermal interface. Works well, temps don't jump around like before. The drives actually run cooler now, a few degrees down. Excellent kit, would recommend, works effectively.
22 sentyabr 2025

Üstünlükləri: Good, quality copper plates, 3 pieces of different thicknesses, packaging is almost premium)) Thermal pads also come in different thicknesses Çatışmazlıqlar: Thermal pads are so-so, not too bad, but not too good either

Bütün rəylər

M.2 2280 mis radiatoru üçün uyğundur, qalınlığı 0,8/1 mm

Əsas məlumat

Materiallar

Əlavə məlumat

Ölçülər

Qabarit ölçüləri

Rəylər, suallar və məqalələr